Reconyx Hyperfire Manual de instrucciones descargar pdf (Pagina 12)

11 ©RECONYX, Inc.

Setup & Programming

With the SD card inserted in the camera,

turn your camera on using the On/Off

switch.

NOTE: If this is the first time you’ve used

your camera, it will automatically display the

Date/Time setup change option, beginning

with Enter Year.

Press the << and >> buttons to scroll through settings for each step (year, month,

day, hour, minute, temperature type and battery type); pressing the OK button

after each step is entered correctly.

TIP: After the initial setup options are set, your camera is ready to take pictures.

All you need to do is make sure your camera has a card and batteries installed,

mount it to a tree, turn it on, close it up, and walk away. The camera will

automatically arm and start taking pictures (with default settings) in two minutes.

Default Settings

Your RECONYX™ HyperFire™ camera comes pre-programmed with factory

default settings. By default the camera will take 3 pictures per trigger with a 1

second pause between pictures and no delay between triggers.

If you wish to change your camera’s settings you can do so easily in the field at

any time. Changes are easily made using the control buttons and the LCD

display. Once you make selections, they are retained by the camera – even

when the camera is off and the batteries are removed – so that you don’t need to

make selections again unless you want to change something.

NOTE: Throughout the manual, default camera settings are shown in RED

CAPITAL letters.

NOTE: Many additional features are available on the Professional cameras.

These are set using the Configuration software that is included with

Professional cameras. See the Configuration software help file in the

software for more information.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Reconyx Hyperfire Manual de instrucciones Pagina 12